Cycling
Universal Adjustable Bike Fender Set (22/24/26/27.5) with 26ft Reflective Tape
Product description
Durable, flexible construction: The fenders are molded from tough PP (polypropylene), giving them impact resistance while remaining light and bendable. They can be flexed and shaped without cracking and will return to form after knocks.
Reflective tape included: The package contains a 26‑foot roll of reflective tape so you can add high‑visibility strips to the fenders or other parts of your bike, helping you stay seen after dark.
Compatibility and fit: Designed to fit most 22", 24", 26" and 27.5" wheels and suitable for MTB, road and city bicycles. Note: the rear clamp will not work on seatposts with an outside diameter under 22 mm.
Tools and installation: A screw kit and an illustrated assembly manual are supplied so you can fit and remove the guards quickly. The set uses a variety of adapters so no major extra tools are usually required; you can adjust the length and height of the rear guard to your preference.
Shape and protection: The fenders use a widened, semi‑circular profile to catch spray and splatter from wet or muddy surfaces. Their increased width and thickness help reduce the amount of debris thrown onto you and the bike frame, and they wipe clean easily after rides.
What’s in the box: Front fender (two‑piece front arrangement), rear fender, adjustable rear mounting arm/connector, 26‑foot reflective tape, screw pack with multiple fixings and an instruction leaflet for installation and customization.
Pros
- Sturdy yet flexible PP construction
- Includes long reflective tape roll
- Multiple mounting options and adjustable fit
Cons
- Rear clamp needs a minimum post diameter
- Front assembly can require tweaking to avoid rub
- Plastic may feel flimsy under heavy stress
VerdictThis kit delivers solid splash protection for a wide range of bicycles at a low cost. The polypropylene guards are lightweight but resilient, and the extra reflective tape is a practical safety add-on. Installation takes a little patience—front mounting can require bending or tweaking the connector—but the adjustable fittings let you raise, lower and extend the guards to avoid tire rub. Good value
Reader reviews
-
Joshua LaFond 5/5
Great
Works great.
-
Gary R. 5/5
Includes installation tool
Matched a 20‑year‑old Trek perfectly. Several front mounting choices; the rear has a single option but fit flawlessly.
-
Brenda Smith 5/5
Good product
Solid value and does the job. Not intended for heavy off‑trail abuse.
-
Applefish 4/5
Missing one screw but otherwise fine
Looks and functions well, but my kit was short one screw for the rear guard. I found a spare and fitted it without issue.
-
Dillon Keller 5/5
Functional and affordable
Installed quickly. Basic plastic fenders that stop most spray. Multiple adapters and simple fit—good for a budget upgrade on my Schwinn.
-
B. by the Water 4/5
Good performance but front needs work
Fit better than the stock guards on one of my bikes. Rear installed quickly; front needed the metal connector to space it away from the tire and I had to bend that connector by hand to stop rubbing. Black looks good and the kit gives flexibility to make it sit higher.
-
Kaeden 5/5
Good for the price if expectations are modest
Works with cantilever brakes and offers many attachment methods. A bit flimsy and I plan to stiffen some parts, but overall keeps you drier through puddles.
-
Crockett Henley 4/5
Effective and adjustable
Rear blocks spray well and has two adjustment screws which are handy with accessories on the seatpost. Front setup works but can still pivot if mounted in the steerer tube hole.
-
Tim Meyer 3/5
Rear stays solid, front gets loose
Easy to install but the front option I used (bolt through the fork) tends to loosen with use and can wobble or pivot side to side, which can be annoying and potentially unsafe.
-
Dale Thompson 5/5
They work and look good
Easy to fit (you’ll want a long screwdriver) and they keep water and mud off. My coworkers like the look too; I won’t ride without fenders now.
-
Russell 5/5
Great value mud guard
Installation was straightforward and the guards are long enough to keep mud off the bike. Plastic feels firm; should handle water and light debris for a season or two.
-
YYC123 3/5
Doesn’t fit my post
Rear clamp is too large for my seatpost and the front couldn’t be secured to the fork with a screw, so I mounted the front to the head tube and hope it holds.
-
Dany 5/5
Easy to install (French review)
Installed easily and adjusted without fuss. Not decorative, but very useful in rain and winter. Lightweight, inexpensive and well thought out—seems solid to me.
Comments
No comments yet.
Sign in or sign up to comment.